Reliable leaker OnLeaks has given a glimpse of what the Google Pixel 7 Pro could look like in a series of leaked 3D renders, as first reported by SmartPrix (through 9to5Google† So far, the upcoming device seems to have several similarities to its Pixel 6 predecessor, including the same prominent camera bar on the back of the phone.
The three cameras on the back of the alleged Pixel 7 Pro look oddly large (but may appear so in this particular render) and can hold a wide-angle camera, a periscope telephoto camera and an ultra-wide-angle camera. On the front of the device is a punch-hole camera on top of the apparent OLED display.
Such as SmartPrix notes that the device has the same curved edges as the Pixel 6 Pro. However, the Pixel 7 Pro is slightly shorter in length and also a little bit wider and thicker at 163 x 76.6 x 8.7mm (or 6.4 x 3 x 0.34 inches) unlike the Pixel 6 Pro’s. 163.9 x 75.9 x 8.9 mm (6.45 x 2.99 x 0.35 in) size. 9to5Google notes the absence of the plastic strip containing the mmWave antenna on the top of some Pixel 6 devices; it appears that Google has swapped this for a mmWave window on the side of the device instead.
Based on these renderings, it looks like Google isn’t deviating far from the design of the Pixel 6, for better or for worse. In our review of the Pixel 6 and 6 Pro, my colleague Dan Seifert’s biggest complaint was the size of each device, and disappointingly, any changes in terms of size seem to be minimal. We saw leaked renders of the more compact Pixel 6A in November, whose name Google appeared to confirm in a Google-branded coloring book. There’s no confirmation from Google on the Pixel 7 or Pixel 6A — the company probably won’t release the Pixel 7 until the fall (when it usually releases new phones), while the Pixel 6A will likely arrive a little earlier.